Three-Phase Cylindrical Capacitors

Name: Three-Phase Cylindrical Capacitors
Brand: Zhiyue
SKU: 00316
Rating: 4.1 (208 reviews)

Notes

Capacitance Deviation (uF): -5% to +10%;

Loss Tangent (tanφ): <0.1% (at Un, 50Hz, 20℃);

Inter-Pole Withstand Voltage: 2.15Un for 5s, without permanent breakdown or flashover;

Pole-Shell Withstand Voltage: 2Un + 2kV (or 3kV if below 3kV) for 10s, without breakdown or flashover;

PDF Download Request a Quote 0086-577-62786608

Detailed introduction

Technical Parameters

1.Rated Voltage Level (kV): 0.23, 0.25, 0.4, 0.45, 0.48, 0.525;

2.Rated Capacity (kvar): 1~50;

1~10kvar: Single-ended terminal;

12.5~30kvar: Screw terminal;

35~50kvar: Delta terminal(＜400V);Screw terminal(＞400V)

3.Capacitance Deviation (uF): -5% to +10%;

4.Loss Tangent (tanφ): <0.1% (at Un, 50Hz, 20℃);

5.Inter-Pole Withstand Voltage: 2.15Un for 5s, without permanent breakdown or flashover;

6.Pole-Shell Withstand Voltage: 2Un + 2kV (or 3kV if below 3kV) for 10s, without breakdown or flashover;

7.Maximum Permissible Voltage:

At 1.1Un: Not exceeding 8 hours within 24 hours;

At 1.15Un: Not exceeding 0.5 hours within 24 hours;

At 1.2Un: Not exceeding 300 seconds;

At 1.3Un: Not exceeding 60 seconds.

8.Maximum Permissible Current: Capacitors can operate continuously at 1.3ln; considering the impact of overvoltage, positive capacitance deviation, and harmonics, the transient current does not exceed 1.43ln;

9.Discharge Device: After disconnecting the power for 180s, the capacitor's voltage drops below 50V.

10.Theoretical Lifespan: Under standard operating conditions, the average lifespan is greater than 100,000 hours.

SPECIFICATION	RATED VOLTAGE(kV) Un	RATED CAPACITY(kVAR) Qn	RATED CAPACITY(kVAR) Cn	RATED CURRENT(A) In	DIMENSIONS φxH(mm)	Installation Screw (MxL)
0.4-1-3	0.4	1	19.9	1.4	65x90／Figure4	M12x14
0.4-2-3	0.4	2	39.8	2.9	65x105／Figure4	M12x14
0.4-3-3	0.4	3	59.7	4.3	60x160／Figure4	M12x14
0.4-5-3	0.4	5	99.5	7.2	65x160／Figure4	M12x14
0.4-7.5-3	0.4	7.5	149.3	10.8	65x240／Figure4	M12x14
0.4-8-3	0.4	8	159.2	11.5	65x240／Figure4	M12x14
0.4-10-3	0.4	10	199.0	14.4	76x240／Figure2	M12x16
0.4-12-3	0.4	12	238.9	17.3	86x240／Figure2	M12x16
0.4-14-3	0.4	14	278.7	20.2	86x240／Figure2	M12x16
0.4-15-3	0.4	15	298.6	21.7	86x240／Figure2	M12x16
0.4-16-3	0.4	16	318.5	23.1	86x290／Figure2	M12x16
0.4-18-3	0.4	18	358.3	26.0	86x290／Figure2	M12x16
0.4-20-3	0.4	20	398.1	28.9	96x290／Figure2	M16x25
0.4-25-3	0.4	25	497.6	36.1	106x290／Figure2	M16x25
0.4-30-3	0.4	30	597.1	43.3	106x290／Figure2	M16x25
0.4-40-3	0.4	40	796.2	57.7	136x290／Figure2	M16x25
0.4-50-3	0.4	50	995.2	72.2	136x290／Figure2	M16x25
0.45-1-3	0.45	1	15.7	1.3	60x90／Figure4	M12x14
0.45-2-3	0.45	2	31.5	2.6	65x90／Figure4	M12x14
0.45-3-3	0.45	3	47.2	3.8	60x160／Figure4	M12x14
0.45-5-3	0.45	5	78.6	6.4	60x160／Figure4	M12x14
0.45-7.5-3	0.45	7.5	118.0	9.6	65x240／Figure4	M12x14
0.45-8-3	0.45	8	125.8	10.3	65x240／Figure4	M12x14
0.45-10-3	0.45	10	157.3	12.8	65x240／Figure4	M12x14
0.45-12-3	0.45	12	188.7	15.4	76x240／Figure2	M12x16
0.45-14-3	0.45	14	220.2	18.0	76x240／Figure2	M12x16
0.45-15-3	0.45	15	235.9	19.2	86x240／Figure2	M12x16
0.45-16-3	0.45	16	251.6	20.5	86x240／Figure2	M12x16
0.45-18-3	0.45	18	283.1	23.1	86x240／Figure2	M12x16
0.45-20-3	0.45	20	314.5	25.7	86x290／Figure2	M12x16
0.45-25-3	0.45	25	393.2	32.1	96x290／Figure2	M16x25
0.45-30-3	0.45	30	471.8	38.5	96x290／Figure2	M16x25
0.45-40-3	0.45	40	629.1	51.3	116x290／Figure2	M16x25
0.45-50-3	0.45	50	786.3	64.2	136x290／Figure2	M16x25
0.45-60-3	0.45	60	943.6	77.0	136x290／Figure2	M16x25
0.48-1-3	0.48	1	13.8	1.2	60x90／Figure4	M12x14
0.48-2-3	0.48	2	27.6	2.4	65x90／Figure4	M12x14
0.48-3-3	0.48	3	41.5	3.6	60x160／Figure4	M12x14
0.48-5-3	0.48	5	69.1	6.0	60x160／Figure4	M12x14
0.48-10-3	0.48	10	138.2	12.0	65x240／Figure4	M12x14
0.48-15-3	0.48	15	207.3	18.0	86x240／Figure2	M12x16
0.48-20-3	0.48	20	276.5	24.1	86x290／Figure2	M12x16
0.48-25-3	0.48	25	345.6	30.1	96x290／Figure2	M16x25
0.48-30-3	0.48	30	414.7	36.1	96x290／Figure2	M16x25
0.48-40-3	0.48	40	552.9	48.1	116x290／Figure2	M16x25
0.48-50-3	0.48	50	691.1	60.1	136x290／Figure2	M16x25
0.525-1-3	0.525	1	11.6	1.1	60x90／Figure4	M12x14
0.525-2-3	0.525	2	23.1	2.2	65x90／Figure4	M12x14
0.525-3-3	0.525	3	34.7	3.3	60x160／Figure4	M12x14
0.525-5-3	0.525	5	57.8	5.5	65x160／Figure4	M12x14
0.525-10-3	0.525	10	115.5	11.0	65x240／Figure2	M12x14
0.525-15-3	0.525	15	173.3	16.5	86x240／Figure2	M12x16
0.525-20-3	0.525	20	231.1	22.0	86x290／Figure2	M12x16
0.525-25-3	0.525	25	288.9	27.5	96x290／Figure2	M16x25
0.525-30-3	0.525	30	346.6	33.0	106x290／Figure2	M16x25
0.525-40-3	0.525	40	462.2	44.0	136x290／Figure2	M16x25
0.525-50-3	0.525	50	577.7	55.0	136x290／Figure2	M16x25

Message Feedback

If you have any enquiry about quotation or cooperation,please free to email us at niki@zhiyue.com or use the following enquiry form,Our sales representative will contact you within 24 hous.thank you for your interest in our products.

Recommend Products

Three-Phase Phase Square Capacitors

Single-Phase Cylindrical Capacitors

Box type BSMJ three phases Power Capacitor

Cylinder type CMKP Single phase low voltage Power Capacitor