high voltage transformer manufacturer

Internally Fused Capacitor Units

Environmentally acceptable proprietary dielectric fluid that provides an ideal balance between low- and high-ambient temperature operation

。Voltage level: 1 ~ 24kV 
。Capacity level: 100 ~ 800kvar 
。Capacitance deviation: -3% ~ +5% 
。Dielectric loss tangent value: ≤0.03%

Unfused Capacitor Units

Unfused capacitor units refer to capacitors that are not equipped with a fuse for protection. Fuses are often used in capacitor units to protect against overcurrent or short-circuit conditions that could lead to damage or failure of the capacitor.

。Voltage level: 1 ~ 24kV 
。Capacity level: 100 ~ 800kvar 
。Capacitance deviation: -3% ~ +5% 
。Dielectric loss tangent value: ≤0.03%

Surge Protection Capacitor Unit

Internally fused capacitor units are capacitors that have built-in fuse protection to prevent catastrophic failure in the event of a short circuit or overload.

。Voltage level: 6~35kV 
。Capacity level: 0.1 to 0.5μF 
。Capacitance deviation: -3 ~ +10% 
。Dielectric loss tangent value: ≤0.03%e

AAM AC filter Power Capacitor

。Environment temperature: -40 ~ +45℃
。Height: ≦1000m
。For bandpass filter, the deviation of actual and the rated capacitance are less than ±5%.
。For high-pass filter, the deviation of actual and the rated capacitance are less than ± 7.5%.

BAM single and three phase Power Capacitor

。Rated voltage: 6.3kV, 6.6kV, 6.6/√3kV, 7.96kV, 10.5kV, 11kV, 11kV, 11/√3kV, please indicated in the order if you want the other special capacity.
。Rated capacity: 33~334kvar please indicated in the order if you want the other special capacity.
。Capacity tolerance: -5 ~ 15%.
。Loss angel tangential value: film & papaer medium tg θ≦0.08%,film medium tg θ≦0.05%.

BAM three phases High voltage Power Capacitor

Altitude: less than 1000m; Ambient Temperature: -40℃ ~ +40℃。
No violent mechanical vibration, no harmful gas and vapor, no electric, and explosive, and explosive dust in location.
Continuous operation voltage: 1.00 Un, long-term max, Over voltage: less.1 Un.
Stable over-curent (including harmonics current) less 1.3 In.

Single-Phase Square Capacitors

Power Factor Correction Capacitors

Optimize Energy, Enhance Efficiency, Create a Green Future

To meet the electrical energy demands of modern industries and businesses, we proudly introduce Power Factor Correction Capacitors that adhere to the International Electrotechnical Commission (IEC) standard 60831.

Three-Phase Phase Square Capacitors

Power Factor Correction Capacitors are suitable for low-voltage power systems with a frequency of 50Hz or 60Hz. They are primarily used to improve power factor, reduce reactive power loss, enhance grid quality, and maximize transformer capacity, among other benefits.

Rated Voltage: 230V, 400V, 450V, 480V, 525V, 690V, 750V, 1200V, other custom voltages available;

Rated Capacity: 1kvar to 60kvar for 0.4~0.69kV, other custom capacities available;

Rated Frequency: 50Hz or 60Hz;

Single-Phase Cylindrical Capacitors

1.Rated Voltage Level (kV): 0.23, 0.25, 0.4, 0.45, 0.48, 0.525;

2.Rated Capacity (kvar): 1~50;

1~10kvar: Single-ended terminal;

12.5~30kvar: Screw terminal;

35~50kvar: Delta terminal(＜400V);Screw terminal(＞400V)

Three-Phase Cylindrical Capacitors

Capacitance Deviation (uF): -5% to +10%;

Loss Tangent (tanφ): <0.1% (at Un, 50Hz, 20℃);

Inter-Pole Withstand Voltage: 2.15Un for 5s, without permanent breakdown or flashover;

Pole-Shell Withstand Voltage: 2Un + 2kV (or 3kV if below 3kV) for 10s, without breakdown or flashover;

APF Active Filter

The active filter detects the load current in real time through the external current transformer CT, and calculates it through the internal DSP to extract the harmonic components of the load current, and then sends it to the internal IGBT through the PWM signal to control the inverter to generate a harmonic with the load.